sroubky

diff --git a/openscad/hadice_sprcha.scad b/openscad/hadice_sprcha.scad
index 6b4af5739074eed6fe79be22ee1837b1d8de7fe1..5f6db46d6f306c82930a0ada48f3d0b069f2482f 100644 (file)
--- a/openscad/hadice_sprcha.scad
+++ b/openscad/hadice_sprcha.scad
@@ -1,19 +1,26 @@
 $fn= 100;
 
+rotate([-90,0,0])
 difference() {
-%translate([0,0,0.1]) cylinder(d1=23, d2=20, h=30);
+translate([0,0,0.1]) cylinder(d1=23, d2=20, h=30);
 union() {
        translate([0,0,16]) cylinder(d=12.5, h=30);
        cylinder(d=13.5, h=5);
        cylinder(d=11.5, h=30);
        translate([0,0,13]) cylinder(d=13.5, h=7);
 }
-}
-//translate([0,0,-12.2]) cylinder(d=23, h=12);
 rotate([90,0,0]) union() {
        translate([7.5,9,-6]) cylinder(d=1.6, h=12);
-       translate([7.5,9,-6]) cylinder(d=3.8, h=1.7);
-       translate([7.5,9,6-1.7]) cylinder(d=3.8, h=1.7);
+       translate([7.5,9,-6-10]) cylinder(d=3.8, h=1.7+10);
+       translate([7.5,9,6-1.7]) cylinder(d=3.8, h=1.7+10);
+}
+rotate([90,0,180]) union() {
+       translate([7.5,9,-6]) cylinder(d=1.6, h=12);
+       translate([7.5,9,-6-10]) cylinder(d=3.8, h=1.7+10);
+       translate([7.5,9,6-1.7]) cylinder(d=3.8, h=1.7+10);
 }
 translate([0,0,9]) rotate_extrude() translate([10.5,0,0]) circle(1);
-translate([0,0,21]) rotate_extrude() translate([9.9,0,0]) circle(1);
\ No newline at end of file
+translate([0,0,21]) rotate_extrude() translate([9.9,0,0]) circle(1);
+translate([-20,0,0]) cube(40);
+}
+//translate([0,0,-12.2]) cylinder(d=23, h=12);